fa-phone-square: (4-zero-3) 805-9945

Halliburton Style G6 Packer/Anchor Completions (Subsurface)

Aug 17, 2017
Total Views

7″ x 3 1/2″ Halliburton/Guiberson G6 Packers for sale. Converted to Anchors. (Elements Removed Spacer Rings Installed) 17-20# and 22-26# Casing Available. Right hand set/Right hand Release 1 /4 turn actuated. All these Anchors will be sold with new Slips, Slip Springs, Take up Spring as well as 50K Gudgeon/Shear Pins. Fully Reconditioned and ready to use as an anchor or convert back to Packer for well bore seal. Available to ship world wide. Pricing on Multiples may be reduced further.

Guiberson® G-6 Packer
Halliburton’s Guiberson® G-6 packer is
a double-grip, retrievable, singlestring
packer designed for service in
water-flooding and enhanced oil
recovery. Because many of these wells
are shallow, the packer was designed
to allow the packing elements to be
packed off with either tubing tension
or compression at the packer. The
double-grip feature allows the option
of leaving tubing in compression or
tension and makes the packer suitable
for use with accessories such as on-off
tools, downhole shut-off valves, and
other related completion tools.
• Ideally suited for enhanced oil
recovery projects
• CO2 and steam injection service with
specific elastomer systems
• Up to 5,000 psi (34.45 MPa)
differential pressure typical
• Short compact length
• Compatible with plastic coating,
sour service trim, or special flow
wet metallurgy
• Internal bypass valve provides
reliable running, releasing, and
• Innovative packing element system
for positive pressure-enhanced
• Opposing slip design holds forces
from either direction while loaded
slip remains on the low pressure side
of the tool
• Emergency shear release
• Take-up feature allows pressure
differential to increase and lock in
added rubber compression


5205 63 St, Lloydminster, AB T9V 2E7, Canada
Call: 639 840 2428

Human Test: Find the X     4 + 9 =

© Copyright 2007-2018 - Oilfield Bargain Inc.